Clean 250 ready to race or simply admire. Call me at 530.257.7229.
$4,200.00
Looking for race ready 83/84 Husqvarna 500CR or maybe XC. Prefer 4 speed but will consider 6 speed.
1974 Bultaco Pursang MK360 cc. Vintage Motocross Legend.
The same bike when Jim Pomeroy gets word title.
Complete bike with matching numbers.
New chain, Akront rims and new Pirelli tires
New handle bar with new Magura levers and gas.
Mikuni carburetor. Great compressions. Gear box working perfectly.
Gas tank, frame freshly painted.
This is project bike. Don’t have ability to finish and start running.
For restoration or parts.
Complete to rebuild or maybe a rebuilt one. Prefer east coast. Would consider a parts bike. really could use some help on locating a 1973/74 yamaha mx250 motor . i have a 360 motor that is rebuildable if anyone could use it. also have a lot of 74 mx 250 parts. Email with your number and i will call you back asap.
1988 KX 250 Vintage. Never raced just farm ridden awesome shape. The bike flies.. $3000
1975 Yamaha MX400B for sale
Rare one-year bike was stored for ten+ years before I bought it four years ago. I turned it into an ice bike because its engine is torquey for a 2 stroke. I have ridden it a total of 20 minutes-the ice has been that bad. After my last ride I decided to sell it for the simple reason at 83, I can’t start the bike, I am too weak and have short legs.
The MXB is in excellent condition. The engine is in great shape and runs perfectly. 1st over piston, new rod, new crank main bearings, new gaskets, ignition parts and seals. The aluminum tank is nice-no dents. It has original side covers and the original pipe with a skyway muffler, which purists want. It has brand new Milleville; MX tires; 21 front (studs removed) and 120/100-18 rear.
In 1975, this was the fastest big bore on loose tracks. It is now set up for vintage motocross. I cut down the rear seat foam. I have installed two Thunder Products carburetor devices, which makes this bike faster than all other stock MX400Bs-throughout the rev range. Here’s something you’ll like for tighter cornering. I had the forks de-raked from original 31 degrees. That will give you a turning advantage over other MXers of the period. For giggles, I had the head tapped for a compression release. You can use it as a kill switch, a starting assist or an extra brake.
The air box is missing so you have to use my dual stage Uni-filter. I suggest you inspect fork internals and rear shock before racing. I didn’t do that because flat ground riding doesn’t tax the suspension systems. The rear rim is dented. Use as is or fix. Here’s a fun thought for you. The price includes free freight to your town. Yep free freight-$3850 in lower 48. If you pick up, I can reduce that! Thanks Phil Little, Mound, MN. Phil Little Racing.com. 952-607-6063
1965 Bultaco Rickman Metisse completely restored. For sale.
Im in search of late 90’s and early 2000’s Shift Mach gloves or Ace gloves in mens medium. And also 1995 and 1996 Fox Pawtector gloves in mens medium. Must be in good shape not all ripped and falling apart. I dont care if they are a little dirty but would prefer them still new in package. I live in Napanee Ontario Canada
Factory Suzuki RM250/RM370 Service Manual- original, not a copy.
$25 + shipping
This is a Pursang pipe from Spain and made for the 1971/72 – Mk5 or Mk6 models.
The pipe is brand new. The silencer is used in good condition.
Asking 500. for both less shipping. Shipping will be with UPS
Richmond Virginia
I have a 125cc Monark MX/Enduro ? frame number 3244 ? I know nothing about the bike other than it’s 95% complete with a fresh paint job on the tank and the seat is redone , the engine turns over but feels rough in one spot ,all the gears seem to be there, it has sachs hubs and engine with a high pipe . This bike needs a good home with someone that would finish the restoration , I’m 71 and have to many other projects to finish before they bury my ass . Please email me for further info , Thanks for looking
Does anyone have any parts for a 1985 CanAm Sonic 560for sale?
In need of an exhaust pipe for 1983-1986 Can Am ASE 250/350.
1974 Honda XR75 currently for sale, it is powered by a 72cc four-stroke single paired with a four-speed transmission, painted in metallic gray. runs perfectly.
Asking $7000, Idaho falls,ID
1974 360 Bultaco Pursang. Project bike. Location Topeka, KS 99% original with Bultaco bolts.
All numbers are match.
Very good compression. Gears working perfectly.
Has Akront rims. All new brake pads. New Pirelli tiers.
Magura (German) gas and levers. Mikuni carburetor.
I have originals carburetor and other small parts.
Need good hands to finish the project. Asking $2400
Attention Collectors!
A collection of 5 1970 Puch 125cc two-stroke vintage MX bikes for sale. Puch sold these high-quality bikes in limited numbers in the early 1970’s.Here’s a weblink with more info on the marque https://www.vintagemx.net/puch-motorcycles/
Bikes are disassembled neatly in various containers. Everything is there, forks, gas tanks, eats, carbs, exhausts, wheels and also including a spare engine. A shop and parts manual is also included. Email me for pics.
Asking $2500 for this amazing whole restoration project.
Looking for a rear fender for a 1979 KX125 stock or aftermarket
looking for 1970 triple tree. needs to be in really good condition. thank you
For Sale good used AJS MX370 fuel tank, no leaks, been repaired. Comes with petcock and gas cap. $75 can ship for additional shipping fee.
Selling 1971 C Z 400 yellow tanker
Serious inquiries only
Asking $5000
In its day, this collectable Hodaka model was a true dual purpose, 100 cc motocross bike with lights and horn so it can be registered for street use. Original women owner and rider, the nice paint green paint and chrome are original but a complete engine, transmission, brake, suspension, wheel overhaul with correct new tires and new seat cover was completed in 2013 by a professional motorcycle restoration shop. Used very rarely since then with around 1000 miles on it since I surprised my wife with the work for Christmas as shown in the photo. Some 6 Volt lighting issues and normal wear and tear from Moto Cross and off road use. Owner’s and shop manuals, keys and spares included. Asking $4,000 or any reasonable offer as it hasn’t been ridden in many years.
FOR SALE 11966 CZ360 TWIN PIPE
This motorcycle is located in the United States specifically Lewiston Idaho area
The Engine has been completely go through about a year ago by Henry Griff!
Since its restoration it has never been raced
New tires, Chain, and Fork seals to name a few new parts if you are wanting more in depth pictures and or a video please feel free to contact me at my email: ljmulalley@yahoo.com
I need to buy a CZ model 980 rear hub. Just need the hub, have the brake plate
1989 Honda CR 500
Looking for a Harley Davidson MX250 motor. Any leads would be appreciated.
