Vintage Motocross Listings

For Sale: 1992 Honda CR125R, 100% rebuild

ALL NEW OEM: cylinder, head, rings, crank, gears, seals, bearings, reeds.
ALL NEW: HENSON clutch basket, clutch plates.
ALL NEW: frame sand blasted & powder coated, MOOSE hourly meter w/ 2.2 hours, kick lever, kill switch, radiator, hoses, radiator louvers, gold series chain, chain guide, chain slider, MIKA sprocket, foot pegs, FMF gold series fatty pipe, PRO-CIRCUIT silencer, clutch cable, brake lines, calipers, brake pads, line clamps, CR logo billet brake & clutch levers, SCOTT grips, oil cap, rear brake fluid reservoir, RENTHAL bars, MIKA cross pad, new seat cover, electrical wiring & MICHELLIN tires. I’m sure I am missing something.
Aaron McNeil/Powersports Supplies/Wetumpka, AL did all the engine work and rebuild.
Johnny Borders/Renegade Suspension/Tallassee, AL did a complete rebuild on KYB front and SHOWIA rear suspension.
TOTAL REBUILD is at $5,831. (I can show you every receipt.)
I raced it at Daytona on Tuesday, March 8th. This bike was a major head turner, and its crazy fast!!
$5500, or I am looking to trade for a Honda CRF250R or Yamaha YZF250.
email me and ill send pics

For Sale: Kawasaki KX500 Engine

kx 500 engine….top-to-bottom with 0 hours on engine…..engine was rebuilt a 1 season ago comes with cdi/coil/carb

86 Completely Rebuilt ………thanks

For Sale: 1984 Honda CR500

1984 cr500 running ..bore big air cooled 2 stroke…made only one year…. you need a boot to kicked over…tons of compression…newer piston../.upgrade 39mm carb /new oil/new plug /new
air cleaner…/new Grips…chain adjusted and lubed ..
ready to kick ass…..$2.500

For Sale: Kawasaki 450 Skid Plate

New KX 450 skid plate for 09 -2014 $65.

FOR SALE: 1980 WR250

BRING OFFERS! 1980 WR250. Engine number is 2081 0397; frame MN06339. The spare cases # 2083 0705. Fully plated and registered for legal street use in PA as an antique vehicle. This bikes runs and stops as it should. Comes with another full wheel set with backing plates, a transmission and gasket set. There is a picture of a receipt that shows work done in May of 2004. I will be installing a new clarke oversized fuel tank soon (3.7 gal), it just arrived. The other extras can be seen in the pictures. Only run with pre-mix made with ethanol free gas… $2975.00 obro https://www.facebook.com/marketplace/item/202223395338704/

For Sale: 1993 YZ250 Rare Purple Factory Frame

I’m selling my titled numbers matching 1993 Yz250 with a Oem purple factory frame. Runs great and is ready to ride or finish the 93 Bradshaw factory race bike build I was working on. Just needs graphics and correct seat cover.

On the bike it has an updated KYB suspension, however the original suspension is also included. Rebuilt linkage and bearings. Currently has an oversized desert tank, Protaper risers and fat bar conversion. New levers and fresh plastics. Full FMF exhaust. Aluminum Skid Plate and Rad guards.

With the bike will come the original MX tank with shrouds, spare 1995 yz250 motor for backup parts. A spare wheel set is included along with spare brake calipers and master cylinders. Also a wiring harness and ignition. Lots of little parts like new levers oem hardware.

ASKING $2800. Located in Salt Lake City, Utah. Will help with shipping anywhere in the country.

For Sale: 1970 Husqvarna 360 cross 8 speed

1970 Husqvarna 360 cross 8 speed.. Mostly complete very rare ..This bike restored can bring 15 to 20k .. Not many left the factory .. Definitely any husky lover would love to add this to the collection or even as first bike.. Price is negotiable…

For Sale: 1978 Husqvarna 360

Beautiful 1978 Husqvarna (’76 360 motor)
1978 frame,chasis airbox, exhaust, etc.
Front forks – Gold air valves.
Rear shocks -Works Connection.
Hallman Sun rims on:
17 inch rr wheel.
21 inch front wheel
Original components. Complete running

Great Fun.
Its, pretty much race ready – vintage eligible class(s).
AHRMA
CalVmx

Wanted: 370 Kickstater

Anyone have a 1979 CamAm 370 Kickstarter for sale? What other bikes interchange with same Kickstarter?

1960’s motocross boots with vibram Motocross soles

Vintage Motocross Motorcycle Boots. Very rare, as old as you can get as far as motocross boots go. Very very rare vibram Motocross soles. These are legit, you can see the wear from the gear shifter on the toe of the left foot and the teeth marks from the brake lever on the soles of the right boot. Maker of the boot is unknown although there are some numbers marked on the inside.. see pics. These were found in Oregon. The size is also unknown but they are very small, the length from toe to heel is 11 1/2 in. I would estimate size 7 in men’s. These also maybe a female’s boots because they were found with a matching size pair of street bike boots from the same era…MAKE OFFER I’m in Eugene Oregon i have more pics

For Sale: 1968 Bultaco Pursang 250 M4 model

1968 Bultaco Pursang 250 M4 model
Fresh and fully rebuilt
Runs great!
Slaps someone me numbers on her and go vintage racing!!
$5450

FOR SALE: 2012 Honda CRF450X Dakar Race Bike

Up for sale is a 2012 Honda CRF450X Dakar Race Bike, the bike start and run great with no issue

Asking for $5299

classiccarsandbike@gmail.com

For Sale: 1983 Team Honda Jackets

I have 2 1980’s Team Honda jackets in excellent cond 1 worn a few times the other 1 time they are both med in size,they are also interchangable to become grey rare jackets great collecter items. $325 for both having trouble uploading pics email me I can send them thanks

For Sale: 1999 SUZUKI RM250

1999 SUZUKI RM250 in excellent mechanical and cosmetic condition.

BILL OF SALE

1999 RM250
Motor was disassembled and rebuilt with new OEM seals and bearings
New gaskets
New rings
New Pro-X billet clutch basket and pressure plate
New Pro-X clutch plates
New Michelin tires, rim bands and wheel bearings
New OEM CDI ECU
New OEM Ignition coil, cap and proper NGK plug
New Polini body kit with 99 Factory Suzuki team Graphics
New MSR clutch perch and lever
New chain buffer
New chain guard
All bearing serviced
New AllBalls Steering head bearings
New OEM Suzuki Petcock
Cleaned and Rebuilt carburetor
New kill switch
New seat cover
Both Master brake cylinders rebuilt with OEM parts
New front brake disc
New FMF Gold Series header
New FMF silencer
New UNI Air filter
New seat cover

This bike has been completely sorted and is ready for the new owner.
2 heat cycles and then the fuel was drained from the carb. Almost as new
I have all the receipts for your review
Bill of sale

For Sale: 1974 Yamaha MX250a

1974 Yamaha MX250a.
About 20 minutes on rebuilt engine. Fresh bore with new .020 over piston. All new bearings and seals. New HPI complete ignition kit. Runs very strong. Oil pump has been removed and is premix at 32:1 now.
New paint and decals.
New plastics from DC Plastics.
New tires and tubes.
Forks cleaned and polished and new seals, oil and dust scrapers.
Lots of other new stuff.
This is a very nice bike ready to ride, race or just show.
I do not have a title for the bike.

Located in Tonasket, WA
360-280-6667
$6,500

For Sale: 1978 Husqvarna CR390

1978 Husqvarna CR390 for sale. Runs and looks great. Engine has been gone through and repaired by a trusted Husqvarna mechanic.

$3500

For Sale: Kawasaki G31 Centurion Parts

Kawasaki G31 centurion stator assy 21046-003 and rotor 21007-017 NOS NLA for sale.
After half a century on a shelf in Scandinavia it is ready to be put to use.
Please contact Hallgeir at halljohan@yahoo.no

For Sale: 1974 Honda XL350

Stock powder coated frame. See photos for description. Too many details to list in this ad. Also included for this bike a new, one of a kind, unused, not installed aluminum swingarm built by KLP. Shipping possible but not preferred. email j12995560@gmail.com

For Sale: 1974 Team Honda Rex Staten Replica

Have everything to build a complete duplicate of this famous bike and a large inventory of spare parts for the same. Too many details to list in this ad. Price to be negotiated. Prefer to sell everything together. Shipping possible but not preferred due to the size of the inventory. email to j12995560@gmail.com

For Sale: 1975 Honda MT 250 Elsinore

Nice re-built/re-conditioned bike that needs a new home/owner. All street equipment has been removed, but saved if you want to restore it as “new” Enduro street legal bike. Restoration was completed 10yrs ago. Motor was rebuilt and got all new internal seals etc. MANY NOS parts used with some left over and extras collected. Bike was stripped-down as a dirt tracker. Have complete wiring harness, lights, gauges etc. Unfortunately, this bike has sat in my outbuilding unridden but covered for 8yrs and will need some love to bring her back to the shape she was in when stored. Don’t expect it to start without a solid carb clean, but compression is ridiculous (as these big thumpers were) and kicks over cleanly.

This would make a great vintage racing candidate or just fill a nostalgic space in your life like it did for me. I know what I have but need to thin the herd and also want to it go to a good home. Make me a realistic offer! Pick-up only. May consider short travel/deliver for right price and person.

Location: North of ATL Georgia USA

Looking for DT1 frame lowering kit and down pipe

I’m trying to build a street tracker DT1 And I could use either a down swept pipe or the dimensions of 1. Maybe also a flat track style seat/tank set up. And a frame lowering kit if available. Or just maybe a copy of the instructions for 1. Any help would be great. Some porting specs too if available.

Wanted: 1972 250CR rear inner fender

Looking for a new or nice alloy or plastic inner fender for my 72 250CR.
Thanks

Suzuki RM 125 Power Valve Exhaust Valve 1989-1995

I will sell exhaust valves for the Suzuki RM 125.
The valves fit any cylinder that has a 3-bolt valve mounting.
The valves are made very precisely, the outer shell is hard anodized.
The price for the set is $200 + shipping, I offer international shipping.
I also have other types of valves for Suzuki.
OEM Valve numbers:
1125427C30
1125443D00
1125443D10
1125443D20
1125527C30
1125543D00
1125543D10
1125543D20

Guide OEM numbers:
1126127C30
1126143D00
1126143D10
1126143D20
1126227C30
1126243D00
1126243D10
1126243D20

For Sale: 1982 Honda XR250R

82 Honda xr250r 4-stroke all original except for new seat cover, tool bag and grips. low mile Runs great! $3400 offer

WANTED: 1982 KX125

I am looking for a 1982 KX125. I raced one a hundred years ago and would like to find one so I could hit a few vintage races. Let me know what you got. adye1@windstream.net